Bayswater solar and battery case study | 2026

Bayswater Solar Battery Installation with Backup and EV Charging

Australis Solar installed 16kW of AIKO solar panels, a 10kW single-phase SigenStor controller and 27kWh of Sigenergy battery storage at this Bayswater home. The system includes a Sigen Gateway for whole-home backup and a 7kW AC EV charger.

Solar, storage, blackout protection and EV charging were coordinated with the roof layout, equipment locations and electrical works. Australis Solar is Perth-based, WA-owned and operating since 2008, with in-house installers and licensed electricians.

  • 32 × AIKO 500W solar panels across a split roof layout
  • 3 × 9kWh battery modules, providing 27kWh of storage
  • Single-phase Gateway backup and dedicated AC EV charging
AIKO solar panels installed across a metal roof in Bayswater.
AIKO solar panels installed across the Bayswater home’s metal roof.

Confirmed project specifications

Bayswater project snapshot

The installed equipment and capacities below are confirmed in the project record.

LocationBayswater, WAInstalled in 2026
Project typeSingle-phase solar, battery, backup and EV charging
Solar capacity16kW32 × AIKO 500W panels
Inverter10kW SigenStorSingle-phase controller
Battery storage27kWh Sigenergy3 × 9kWh modules
BackupSigen GatewayWhole-home backup configuration
EV charging7kW AC chargerSigenergy AC EV charging
Roof26° metal roofSplit solar array layout
Electrical workMain switch replacement4 × Type A circuit protection upgrades

Designed around the property

Customer objective and design considerations

The design coordinated the roof, single-phase supply and energy equipment as one system.

One household energy system

The completed design brings solar generation, storage, backup and EV charging together on the home’s single-phase supply.

The battery provides stored energy for household use when solar generation falls, while the charger adds a dedicated EV charging option.

Roof layout and equipment locations

The project record identifies a 26° metal roof and a split array layout. Panel groups follow the available roof areas.

Site planning also covered the controller, battery, Gateway and garage charger locations and their cable routes.

Electrical and backup integration

The scope included a main switch replacement and 4 Type A circuit protection upgrades.

The Gateway supplies the switching hardware required for the commissioned whole-home backup configuration.

One coordinated single-phase platform

System design and installed components

Solar panels generate energy, the controller supplies AC power and the battery stores energy. Backup and EV charging each have their own operating limits.

Solar generation

32 × AIKO 500W panels

The 32 panels provide 16kW of installed solar capacity across the metal roof.

The panel layout follows the available roof areas.

Compare solar panels for Perth homes
Power conversion

10kW single-phase SigenStor

The SigenStor controller coordinates solar conversion and battery operation within the system.

Its 10kW AC power rating is different from the battery’s stored energy capacity.

Explore Sigenergy systems in Perth
Stored energy

27kWh Sigenergy battery storage

Three 9kWh modules provide 27kWh of usable battery storage.

Available power and backup duration depend on equipment limits, charge level and household demand.

Compare solar battery options
Blackout support

Sigen Gateway whole-home backup

The single-phase Gateway provides the switching and control for the backup configuration.

Simultaneous appliance use remains subject to inverter and battery power, starting loads and the commissioned configuration.

Understand Sigenergy backup options
EV charging

Sigenergy 7kW AC EV charger

A dedicated AC charger provides a home charging option on the single-phase supply.

Actual charging power depends on the vehicle, available power and system settings. Direct daytime solar charging can preserve battery energy for the home.

Compare EV charger options
Electrical protection

Main switch and Type A upgrades

The project included a single-phase main switch replacement and 4 Type A circuit protection upgrades.

These works form part of the system’s electrical integration and backup scope.

Explore residential solar installations

Practical design and installation

Property considerations and Australis Solar solutions

The recorded roof layout, electrical works and customer feedback explain how the project came together.

01

Working with a split roof layout

Consideration

The roof layout required separate panel groups rather than one uninterrupted block.

Project evidence

The project record identified the 26° metal roof and split array requirement.

Australis Solar solution

The completed 32-panel AIKO installation follows the available roof areas, retaining the specified 16kW solar capacity.

02

Coordinating single-phase equipment

Consideration

Solar, storage, backup and charging needed to work within the same household electrical system.

Project evidence

Site planning covered equipment positions, cable routes and switchboard works.

Australis Solar solution

The installed scope combines a 10kW single-phase controller, 27kWh battery, Gateway and 7kW AC EV charger with a main switch replacement and 4 Type A upgrades.

03

Supporting the home after installation

Consideration

A connected energy system also needs clear handover and support after commissioning.

Project evidence

The homeowner’s Google review highlighted prompt responses and assistance with his home automations.

Australis Solar solution

Australis Solar supported the customer after completion. His review describes the installation team as professional and recommends the business.

Bayswater project questions

Solar, battery, backup and EV charging FAQs

What solar and battery system was installed in Bayswater?

The installation combines 16kW of AIKO solar, a 10kW single-phase SigenStor controller, 27kWh of battery storage, a single-phase Sigen Gateway and a 7kW AC EV charger.

Does the battery automatically provide blackout protection?

Backup requires suitable hardware and configuration. This installation includes a Sigen Gateway alongside the compatible SigenStor controller and battery.

Can every appliance run together during a blackout?

Whole-home backup does not mean unlimited power. The appliances that can run together depend on inverter and battery power, state of charge, available solar, starting currents and the commissioned configuration.

Is 27kWh the same as 27kW?

No. The 27kWh figure describes stored energy. The controller’s 10kW rating describes AC power. How long stored energy lasts depends on the actual household load and available battery charge.

Will the EV charge at 7kW all the time?

Charging depends on the vehicle’s AC charging capability, available power and charger settings. Where practical, charging directly from daytime solar can preserve the home battery for evening household use.

What did the homeowner say about the installation?

The homeowner’s Google review highlighted knowledgeable sales advice, professional installation and prompt support, including assistance with home automations. He wrote: “I’m really happy with my new Sigenergy setup.”

Request a property-specific design

Planning a solar battery installation in Bayswater?

Send Australis Solar your latest Synergy bill and details of your roof, existing equipment and future energy plans. Our Perth team can assess solar, storage, backup and EV charging together before recommending a suitable configuration.

Your proposal will set out the equipment, capacities, backup scope, electrical works and connection requirements for your property.